TiDB Cloud
TiDB Self-Managed
Learning Center
Contact Us
​
Sign InStart for Free

PD Configuration File

The PD configuration file supports more options than command-line parameters. You can find the default configuration file here.

This document only describes parameters that are not included in command-line parameters. Check here for the command line parameters.

name

  • The unique name of a PD node
  • Default value: "pd"
  • To start multiply PD nodes, use a unique name for each node.

data-dir

  • The directory in which PD stores data
  • Default value: default.${name}"

client-urls

  • The list of client URLs to be listened to by PD
  • Default value: "http://127.0.0.1:2379"
  • When you deploy a cluster, you must specify the IP address of the current host as client-urls (for example, "http://192.168.100.113:2379"). If the cluster runs on Docker, specify the IP address of Docker as "http://0.0.0.0:2379".
  • The list of advertise URLs for the client to access PD
  • Default value: "${client-urls}"
  • In some situations such as in the Docker or NAT network environment, if a client cannot access PD through the default client URLs listened to by PD, you must manually set the advertise client URLs.
  • For example, the internal IP address of Docker is 172.17.0.1, while the IP address of the host is 192.168.100.113 and the port mapping is set to -p 2380:2380. In this case, you can set advertise-client-urls to "http://192.168.100.113:2380". The client can find this service through "http://192.168.100.113:2380".

peer-urls

  • The list of peer URLs to be listened to by a PD node
  • Default value: "http://127.0.0.1:2380"
  • When you deploy a cluster, you must specify peer-urls as the IP address of the current host, such as "http://192.168.100.113:2380". If the cluster runs on Docker, specify the IP address of Docker as "http://0.0.0.0:2380".
  • The list of advertise URLs for other PD nodes (peers) to access a PD node
  • Default: "${peer-urls}"
  • In some situations such as in the Docker or NAT network environment, if the other nodes (peers) cannot access the PD node through the default peer URLs listened to by this PD node, you must manually set the advertise peer URLs.
  • For example, the internal IP address of Docker is 172.17.0.1, while the IP address of the host is 192.168.100.113 and the port mapping is set to -p 2380:2380. In this case, you can set advertise-peer-urls to "http://192.168.100.113:2380". The other PD nodes can find this service through "http://192.168.100.113:2380".

initial-cluster

  • The initial cluster configuration for bootstrapping

  • Default value: "{name}=http://{advertise-peer-url}"

  • For example, if name is "pd", and advertise-peer-urls is "http://192.168.100.113:2380", the initial-cluster is "pd=http://192.168.100.113:2380".

  • If you need to start three PD servers, the initial-cluster might be:

    pd1=http://192.168.100.113:2380, pd2=http://192.168.100.114:2380, pd3=192.168.100.115:2380

initial-cluster-state

  • The initial state of the cluster
  • Default value: "new"

initial-cluster-token

  • Identifies different clusters during the bootstrap phase
  • Default value: "pd-cluster"
  • If multiple clusters that have nodes with same configurations are deployed successively, you must specify different tokens to isolate different cluster nodes.

lease

  • The timeout of the PD Leader Key lease. After the timeout, the system re-elects a Leader.
  • Default value: 3
  • Unit: second

quota-backend-bytes

  • The storage size of the meta-information database, which is 8GiB by default
  • Default value: 8589934592

auto-compaction-mod

  • The automatic compaction modes of the meta-information database
  • Available options: periodic (by cycle) and revision (by version number).
  • Default value: periodic

auto-compaction-retention

  • The time interval for automatic compaction of the meta-information database when auto-compaction-retention is periodic. When the compaction mode is set to revision, this parameter indicates the version number for the automatic compaction.
  • Default value: 1h

force-new-cluster

  • Determines whether to force PD to start as a new cluster and modify the number of Raft members to 1
  • Default value: false

tso-update-physical-interval

  • The interval at which PD updates the physical time of TSO.
  • In a default update interval of TSO physical time, PD provides at most 262144 TSOs. To get more TSOs, you can reduce the value of this configuration item. The minimum value is 1ms.
  • Decreasing this configuration item might increase the CPU usage of PD. According to the test, compared with the interval of 50ms, the CPU usage of PD will increase by about 10% when the interval is 1ms.
  • Default value: 50ms
  • Minimum value: 1ms

pd-server

Configuration items related to pd-server

server-memory-limit New in v6.6.0

  • The memory limit ratio for a PD instance. The value 0 means no memory limit.
  • Default value: 0
  • Minimum value: 0
  • Maximum value: 0.99

server-memory-limit-gc-trigger New in v6.6.0

  • The threshold ratio at which PD tries to trigger GC. When the memory usage of PD reaches the value of server-memory-limit * the value of server-memory-limit-gc-trigger, PD triggers a Golang GC. Only one GC is triggered in one minute.
  • Default value: 0.7
  • Minimum value: 0.5
  • Maximum value: 0.99

enable-gogc-tuner New in v6.6.0

  • Controls whether to enable the GOGC Tuner.
  • Default value: false

gc-tuner-threshold New in v6.6.0

  • The maximum memory threshold ratio for tuning GOGC. When the memory exceeds this threshold, i.e. the value of server-memory-limit * the value of gc-tuner-threshold, GOGC Tuner stops working.
  • Default value: 0.6
  • Minimum value: 0
  • Maximum value: 0.9

flow-round-by-digit New in TiDB 5.1

  • Default value: 3
  • PD rounds the lowest digits of the flow number, which reduces the update of statistics caused by the changes of the Region flow information. This configuration item is used to specify the number of lowest digits to round for the Region flow information. For example, the flow 100512 will be rounded to 101000 because the default value is 3. This configuration replaces trace-region-flow.

min-resolved-ts-persistence-interval New in v6.0.0

  • Determines the interval at which the minimum resolved timestamp is persistent to the PD. If this value is set to 0, it means that the persistence is disabled.
  • Default value: Before v6.3.0, the default value is "0s". Starting from v6.3.0, the default value is "1s", which is the smallest positive value.
  • Minimum value: 0
  • Unit: second

security

Configuration items related to security

cacert-path

  • The path of the CA file
  • Default value: ""

cert-path

  • The path of the Privacy Enhanced Mail (PEM) file that contains the X509 certificate
  • Default value: ""

key-path

  • The path of the PEM file that contains the X509 key
  • Default value: ""

redact-info-log New in v5.0

  • Controls whether to enable log redaction in the PD log
  • When you set the configuration value to true, user data is redacted in the PD log.
  • Default value: false

log

Configuration items related to log

level

  • Specifies the level of the output log
  • Optional value: "debug", "info", "warn", "error", "fatal"
  • Default value: "info"

format

  • The log format
  • Optional value: "text", "json"
  • Default value: "text"

disable-timestamp

  • Whether to disable the automatically generated timestamp in the log
  • Default value: false

log.file

Configuration items related to the log file

max-size

  • The maximum size of a single log file. When this value is exceeded, the system automatically splits the log into several files.
  • Default value: 300
  • Unit: MiB
  • Minimum value: 1

max-days

  • The maximum number of days in which a log is kept
  • If the configuration item is not set, or the value of it is set to the default value 0, PD does not clean log files.
  • Default value: 0

max-backups

  • The maximum number of log files to keep
  • If the configuration item is not set, or the value of it is set to the default value 0, PD keeps all log files.
  • Default value: 0

metric

Configuration items related to monitoring

interval

  • The interval at which monitoring metric data is pushed to Prometheus
  • Default value: 15s

schedule

Configuration items related to scheduling

max-merge-region-size

  • Controls the size limit of Region Merge. When the Region size is greater than the specified value, PD does not merge the Region with the adjacent Regions.
  • Default value: 20
  • Unit: MiB

max-merge-region-keys

  • Specifies the upper limit of the Region Merge key. When the Region key is greater than the specified value, the PD does not merge the Region with its adjacent Regions.
  • Default value: 200000

patrol-region-interval

  • Controls the running frequency at which replicaChecker checks the health state of a Region. The smaller this value is, the faster replicaChecker runs. Normally, you do not need to adjust this parameter.
  • Default value: 10ms

split-merge-interval

  • Controls the time interval between the split and merge operations on the same Region. That means a newly split Region will not be merged for a while.
  • Default value: 1h

max-snapshot-count

  • Controls the maximum number of snapshots that a single store receives or sends at the same time. PD schedulers depend on this configuration to prevent the resources used for normal traffic from being preempted.
  • Default value value: 64

max-pending-peer-count

  • Controls the maximum number of pending peers in a single store. PD schedulers depend on this configuration to prevent too many Regions with outdated logs from being generated on some nodes.
  • Default value: 64

max-store-down-time

  • The downtime after which PD judges that the disconnected store cannot be recovered. When PD fails to receive the heartbeat from a store after the specified period of time, it adds replicas at other nodes.
  • Default value: 30m

max-store-preparing-time New in v6.1.0

  • Controls the maximum waiting time for the store to go online. During the online stage of a store, PD can query the online progress of the store. When the specified time is exceeded, PD assumes that the store has been online and cannot query the online progress of the store again. But this does not prevent Regions from transferring to the new online store. In most scenarios, you do not need to adjust this parameter.
  • Default value: 48h

leader-schedule-limit

  • The number of Leader scheduling tasks performed at the same time
  • Default value: 4

region-schedule-limit

  • The number of Region scheduling tasks performed at the same time
  • Default value: 2048

enable-diagnostic New in v6.3.0

  • Controls whether to enable the diagnostic feature. When it is enabled, PD records the state during scheduling to help diagnose. If enabled, it might slightly affect the scheduling speed and consume more memory when there are many stores.
  • Default value: Starting from v7.1.0, the default value is changed from false to true. If your cluster is upgraded from a version earlier than v7.1.0 to v7.1.0 or later, the default value does not change.

hot-region-schedule-limit

  • Controls the hot Region scheduling tasks that are running at the same time. It is independent of the Region scheduling.
  • Default value: 4

hot-region-cache-hits-threshold

  • The threshold used to set the number of minutes required to identify a hot Region. PD can participate in the hotspot scheduling only after the Region is in the hotspot state for more than this number of minutes.
  • Default value: 3

replica-schedule-limit

  • The number of Replica scheduling tasks performed at the same time
  • Default value: 64

merge-schedule-limit

  • The number of the Region Merge scheduling tasks performed at the same time. Set this parameter to 0 to disable Region Merge.
  • Default value: 8

high-space-ratio

  • The threshold ratio below which the capacity of the store is sufficient. If the space occupancy ratio of the store is smaller than this threshold value, PD ignores the remaining space of the store when performing scheduling, and balances load mainly based on the Region size. This configuration takes effect only when region-score-formula-version is set to v1.
  • Default value: 0.7
  • Minimum value: greater than 0
  • Maximum value: less than 1

low-space-ratio

  • The threshold ratio above which the capacity of the store is insufficient. If the space occupancy ratio of a store exceeds this threshold value, PD avoids migrating data to this store as much as possible. Meanwhile, to avoid the disk space of the corresponding store being exhausted, PD performs scheduling mainly based on the remaining space of the store.
  • Default value: 0.8
  • Minimum value: greater than 0
  • Maximum value: less than 1

tolerant-size-ratio

  • Controls the balance buffer size
  • Default value: 0 (automatically adjusts the buffer size)
  • Minimum value: 0

enable-cross-table-merge

  • Determines whether to enable the merging of cross-table Regions
  • Default value: true

region-score-formula-version New in v5.0

  • Controls the version of the Region score formula
  • Default value: v2
  • Optional values: v1 and v2. Compared to v1, the changes in v2 are smoother, and the scheduling jitter caused by space reclaim is improved.

store-limit-version New in v7.1.0

  • Controls the version of the store limit formula
  • Default value: v1
  • Value options:
    • v1: In v1 mode, you can manually modify the store limit to limit the scheduling speed of a single TiKV.
    • v2: (experimental feature) In v2 mode, you do not need to manually set the store limit value, as PD dynamically adjusts it based on the capability of TiKV snapshots. For more details, refer to Principles of store limit v2.

enable-joint-consensus New in v5.0

  • Controls whether to use Joint Consensus for replica scheduling. If this configuration is disabled, PD schedules one replica at a time.
  • Default value: true

hot-regions-write-interval New in v5.4.0

  • The time interval at which PD stores hot Region information.
  • Default value: 10m

hot-regions-reserved-days New in v5.4.0

  • Specifies how many days the hot Region information is retained.
  • Default value: 7

replication

Configuration items related to replicas

max-replicas

  • The number of replicas, that is, the sum of the number of leaders and followers. The default value 3 means 1 leader and 2 followers. When this configuration is modified dynamically, PD will schedule Regions in the background so that the number of replicas matches this configuration.
  • Default value: 3

location-labels

isolation-level

strictly-match-label

  • Enables the strict check for whether the TiKV label matches PD's location-labels.
  • Default value: false

enable-placement-rules

label-property

Configuration items related to labels

key

  • The label key for the store that rejected the Leader
  • Default value: ""

value

  • The label value for the store that rejected the Leader
  • Default value: ""

dashboard

Configuration items related to the TiDB Dashboard built in PD.

tidb-cacert-path

  • The path of the root CA certificate file. You can configure this path when you connect to TiDB's SQL services using TLS.
  • Default value: ""

tidb-cert-path

  • The path of the SSL certificate file. You can configure this path when you connect to TiDB's SQL services using TLS.
  • Default value: ""

tidb-key-path

  • The path of the SSL private key file. You can configure this path when you connect to TiDB's SQL services using TLS.
  • Default value: ""

public-path-prefix

  • When TiDB Dashboard is accessed behind a reverse proxy, this item sets the public URL path prefix for all web resources.
  • Default value: /dashboard
  • Do not modify this configuration item when TiDB Dashboard is accessed not behind a reverse proxy; otherwise, access issues might occur. See Use TiDB Dashboard behind a Reverse Proxy for details.

enable-telemetry

  • Determines whether to enable the telemetry collection feature in TiDB Dashboard.
  • Default value: false
  • See Telemetry for details.

replication-mode

Configuration items related to the replication mode of all Regions. See Enable the DR Auto-Sync mode for details.

Controller

This section describes the configuration items that are built into PD for Resource Control.

degraded-mode-wait-duration

  • Time to wait to trigger the degradation mode. Degradation mode means that when the Local Token Bucket (LTB) and Global Token Bucket (GTB) are lost, the LTB falls back to the default resource group configuration and no longer has a GTB authorization token, thus ensuring that the service is not affected in the event of network isolation or anomalies.
  • Default value: 0s
  • The degradation mode is disabled by default.

request-unit

The following are the configuration items about the Request Unit (RU).

read-base-cost

  • Basis factor for conversion from a read request to RU
  • Default value: 0.25

write-base-cost

  • Basis factor for conversion from a write request to RU
  • Default value: 1

read-cost-per-byte

  • Basis factor for conversion from read flow to RU
  • Default value: 1/(64 * 1024)
  • 1 RU = 64 KiB read bytes

write-cost-per-byte

  • Basis factor for conversion from write flow to RU
  • Default value: 1/1024
  • 1 RU = 1 KiB write bytes

read-cpu-ms-cost

  • Basis factor for conversion from CPU to RU
  • Default value: 1/3
  • 1 RU = 3 millisecond CPU time

Was this page helpful?

Download PDFRequest docs changesAsk questions on Discord